Botroniks Arduino codes for everyone = PCC1070A: K Type Thermocouple, MAX6675, and Arduino based Temperature Monitoring - FREE!

BotronikS - Final code for all types of Arduino and PC users: -- HOME -- CONTACT


Botroniks Arduino Code
MAX6675: 1 - 2 - 3
misc: Wires: 1--2--3 - Resistors: 1 - 2- 3
connections (click to enlarge)
- Need additional accessories:

PCC1070A: K Type Thermocouple, MAX6675, and Arduino based Temperature Monitoring - FREE!

The offered code shows measuring temperature(s):
Used sensor & harware: Link1 -- Link2 -- Link3
For Arduino boards:: NANO -- UNO -- MEGA
Arduino pins are used:
uc ATmega328p (NANO, UNO,...): D4=SO(DO) - D5=CS - D6=SCK(CLK)
uc AtMega2560 (MEGA,...): D4=SO(DO) - D5=CS - D6=SCK(CLK)
Electrical note: (Recommendation:Use the following accessories for testing as well as for later use: Lnk1 - Lnk2 )
MAX6675 pcb - rest of connections: VCC=5V GND=GND
No additional power required (USB power only from PC).
Download the FreeHEX codes below, unpack and upload to the proper Arduino board (Use a free net tool for example XLoader)
1. uc ATmega328-16MHz-5V (NANO,UNO..): PCC1070A-M328
2. uc AtMega2560 (Mega (ATMEGA2560)...): PCC1070A-M2560
You can test the uploaded code using some free serial communication software such as Termite
Description of program commands
AT command (ASCII characters) - 9600 Baud ,8 Data bits,None Parity,1 Stop Bit - AT commands must be uppercase, lowercase invalid
AT - attention command (returns OK)
AT+INF - software code info (returns ucAppName)
AT+RV1 - Reading value 1 (Sensor1 temperature in Celsius) (in one decimal point form)
AT+RV2 - Reading value 2 (-999 = not connected)
AT+RV3 - Reading value 3 (Sensor1 temperature in Farenheits) (in one decimal point form)
AT+RV4 - Reading value 4 (-999 = not connected)
For those familiar with Arduino programming: PCC1070A - PCC1070Azip
PC Application(s):
PC Application(s) (for WINDOWS): In order for the offered PC applications to work, it is necessary to download and install (only first time): VB6RunTimePlus2.2
Download the PC application, unpack and start (allow windows to start applications - how) enter the COM port number where the Arduino is connected and use that.
PC App: PCC1070A-PcApp1